技术支持
温度效用
返回上一页

规格

 

Memory data from the TEMPERATURE HiTESTER 3443 can be transferred to a PC and saved in a text file.

Real-time measurement can be done with the TEMPERATURE HiTESTER 3444, 3445 connected to a PC.

Memory and real-time measurement data can be transferred to Microsoft Excel.

Real-time measurement data can be displayed on a graph.

Displayed graphs can be converted to BMP format for various uses, such as for pasting into reports.

Settings of the Temperature HiTester can be changed.

详细功能

 

Version upgrade procedure

1.Click Download to download the file.

2.Decompress the downloaded file. Folder is created named tut104e.

3.Delete the old version of the TEMP Utility from the Add/Remove Programs Property in the Windows Control Panel.

4.Run Setup.exe in tut104e folder and follow the installation instructions.

 

历史版本

 

 

V 1.04 (Newest Version)

Fixed the bug that caused real-time measurement data to sometimes fail to be saved when another channel was selected from the CH list immediately after finishing real-time measurement.

[ Workaround ]
Avoid clicking the CH list for about two seconds after measurement (until the menu and buttons return to their normal operating state).    

Fixed the bug that caused the lowest digit of the logging time to be ignored (during otherwise seemingly normal operation) after entering a value of 100,000 or more as the logging time for real-time measurement or on the timer setup screen.

[ Modification ]
The entry value for logging time is now restricted to 0 to 99,999.

[ Workaround ]
Change the logging time units, if necessary, to keep entries below 100,000.    


 

V1.03

Fixed the bug that caused an error to occur 8.89 hours after the last communication with the machine, forcing operations to terminate.

[ Workaround ]
Close the application within 8.89 hours after the last communication with the machine (either making a setting or finishing real-time measurement).    

Fixed the bug that caused rounded values of calculation results, such as average values, to be shifted by 0.1.    

Fixed the bug that caused an application error when writing data from the TEMP Utility to Excel97 and closing the Excel Workbook.

[ Workaround ]
Do not close the Workbook to finish the Excel application while writing data to Excel.    


 

V1.02

Fixed the bug that caused stored measurement values between -9.9 to -0.1℃ to be read as 0.0℃ when reading memory data.    

Fixed the bug that caused the lowest digit of the logging time to be ignored (during otherwise seemingly normal operation) after entering a value of 10,000 or more as the logging time for real-time measurement or on the timer setup screen.

[ Workaround ]
Change the logging time units to keep entries below 10,000.    

Fixed the bug that caused an error to occur and operation to terminate when reading memory data, if the data table was displayed and an adjustment value was entered in the no-memory data state.

[ Workaround ]
Avoid entering (changing) adjustment values in the data table when there is no memory data.    


 

V1.01

Initial release    


 

操作环境

 

●Computer: PC with at least an i486DX CPU running Windows 95, Windows 98 or Windows NT4.0.

●Display: At least 800 x 600 dot resolution

●Memory: At least 4 MB

●Hard Disk: At least 4 MB free space

●Notes

●Copyright
The copyrights of the executable files and documentation for this program are property of Hioki E. E. Corporation.

●Conditions of Use
Bundling and sales of the software and documentation for purposes of profit are not permitted without permission of the copyright owner. Also, modification of this product is not permitted without permission of the copyright owner.

●Responsibility and Liability
This program is provided at no charge, to be used freely under the responsibility of the user. We cannot accept liability for the results of the use of this software.

 

联系方式

 

1.欢迎将有关意见、建议、机器运行报告以及软件不良报告等通知我公司。请用以下的客户服务热线联系。

2.您所提供的意见要求等,可能在您未知的情况下被采用。请预先知悉。

客户服务热线:400-920-6010(日置(上海)测量技术有限公司)

会员登录

在线联络

联系我们

返回顶部

电子样本

微信小程序:日置资料中心