
HIOKI ST5540, ST5541 Memory Data Retrieving Software  ST5540Memory
HIOKI E.E. CORPORATION

[Overview]
This PC application features the ability to download  the data save in model ST5540/41, as well as save the data in CSV format.

[System Configuration]
1. Windows 7(32bit/64bit), 8(32bit/64bit)
2. This software is developped using .NET Framework 2.0.
   If it is not installed in the PC, installing .NET Framework 2.0 or later is required.
   Go to Microsoft(R) website to download, and install it into the PC.

[Installing the software]
Double-click "Setup.exe" to start the installer.
Error message may come up if the software is already installed in the PC.
In case of re-installation, uninstall the software once, and then install the software again.

[Uninstalling the software]
From the Windows "start" menu, select the "Control Panel", and double-click "Add or Remove Programs".


[Using the software]
1.Connect PC and ST5540/41 with either USB cable or RS-232C Crossover cable.
@Turn on the power swtich of ST5540/41.
2.Execute the software.
3.Click the menu "Settings" to open the setting window, and select a COM port connected to ST5540/41.
  Setting to "AUTO" enables to detect the connected port# automatically.
4.Click "Load Memory" button to download the measurement data from ST5540/41.
5.Click "Save" to save the data to a file in CSV format.
6.From the menu "File", click "Open" to open the CSV format file.


[Copyright]
The copyright to the documents is owned by Hioki E. E. Corporation and other licensor.

[Conditions for use]
This software may not be bundled with software or other publications which are sold for profit without the express written permission of the copyright owner. Further, this software may not be copied or modified without the express written permission of the copyright owner.


[Responsibility for use]
This software is free. It is provided for use at the user's risk. 
Hioki disclaims any and all responsibility for any consequences arising out of use of this software.


[Version Upgrade Historyz
2014/09/12 Ver1.0.1.0	Add 2 display launguages (English and Korean)
2013/11/06 Ver1.0.0.0	First Release
