  PW6001 LabView Driver                    
                              HIOKI E.E.CORPORATION


Thank you for downloading the PW6001 LabVIEW Driver.
This LabVIEW driver is designed to control and collect data from HIOKI's POWER ANALYZER PW6001 when using National Instrument's LabVIEW.
For details on the driver specifications, refer to the Function Manual.



<Specifications>
1. These are LabVIEW drivers for Model PW6001 Power Analyzer.
2. This LabVIEW driver can control and collect data from PW6001. However, it is not capable of controlling all functions. For details, refer to the Function Manual.
3. Please refer to "Sample Program Instruction.pdf" about the DEMO function.
4. The drivers are written in LabVIEW2009sp1 and have been verified to work with LabVIEW2017 or earlier.
If a driver is overwritten with a later version of LabVIEW, it will be unreadable with earlier versions of it.
5. To use the drivers, the firmware version 1.21 or later is required to be installed on Model PW6001.


<Operating environment>
Windows7(32-bit or 64-bit),Windows 8/8.1(32-bit or 64-bit),Windows 10(32-bit or 64-bit)
The LabVIEW versions 2009sp1 to 2017. 
 (Details depend on the LabVIEW operating specifications.)


<File contents>
  readme.txt                            This text file
  HIOKI_PW6001_E                        PW6001 LabVIEW driver 
  FunctionManual.pdf                    Function Manual for the PW6001
  SampleProgramInstruction.pdf          LabVIEW DEMO Sample for the PW6001


<Notes>
1.Copyright
The copyright to the executable program file and associated documents is owned by HIOKI E.E. CORPORATION.
2.Conditions for use
This utility may not be bundled with software or other publications which are sold for profit without the express written permission of the copyright owner.
Further, this product may not be modified without the express written permission of the copyright owner.
3.Responsibility for use
This program is free software. It is provided for use at the user's risk.
HIOKI disclaims any and all responsibility for any consequences arising out of use of this software


<Contact information>
*HIOKI welcomes opinions, suggestions, operation reports, and bug reports. Please send such communications to the following address.
*HIOKI reserves the right to incorporate any suggestions and opinions received in its products without notice.
*E-mail: os-com@hioki.co.jp (International Sales Department)


<Change history>
V2.00
*"Conf Triger.vi" was revised the wrong character and changed to "Conf Trigger.vi".
*"Conf External Motor.vi" and "Conf Source.vi" were added the argument.
*"Conf Scale.vi" was revised an input range.
*"Demo Measure-H.vi" was changed the handling order beyond the biggest analysis order.
*"Measure Wave_CH.vi", "Measure Wave_Logic.vi", "Measure FFT.vi", "Wave State.vi",
"ScreenShot.vi", "Demo Measure_FFT.vi", "Demo Measure_Wave.vi" were added.
